With 500A/50mV shunt measures from 0.1 to over 400 amps. With the 100A/100 mV shunt: measures 0.01 to over 70 amps. Resolution and maximum amps depends on choice of required shunt. Or the meter may be set up to measure only incoming energy from solar array or other energy source, or only load amps or watts if desired. Amps are accurate to ☑% ☑ least significant digit. You can choose to use either “amps” or “watts” to register the energy going in our out of the battery. ![]() Volts (only) can be read for optional second battery.īattery amps (or watts) on main batteries: For battery systems with nominal volts from 12 to 48V. Reads Battery volts 10.0-65.0V accurate to ± 0.2% ☑ least significant digit. Push SELECT to cycle through these: Battery volts of main and secondary batteries: The newer TM-2030 includes better lightning protection compared with the TM-2020.(For the technically knowledgeable only) The TM-2030 has a serial data output of all the “real time” data-which could be used to access data for other control or output in, for example OEM applications.The TM-2030 has a “simplified” level of operation suitable for most users, but can be configured for more flexibility (and complexity) where occasionally required.The TM-2030 can also monitor the voltage only of a second battery, such as a starting battery, or possibly also the input voltage of a solar array (if less than 100 volts.). ![]() This also provides lightning protection for the TM-2020. The TM-2020 will operate with 12 or 24 V systems, but requires the addition of the “TM-48VA” Adapter and lightning protection board when using it with 48V battery systems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |